We recommend using porcelain tiles, which are very heat resistant. Most wood burning stoves have insulation blocks in the back and sides to minimise the heat escaping, and there should also be a minimum of 150mm (6 inches) around the back and the side of the stove for ventilation.
What material do you put behind a wood burning stove?
Stone or brick is a common material to use behind a wood burning stove. These panels help create more of a focal point for a room. The NASD explains that any area within 36 inches of the stove in all directions should be covered.
What should a wood stove sit on?
(1) Any type of concrete patio blocks or house bricks will make a safe, heat & fireproof floor for a wood stove. Used = recycled materials are least expensive. If you live near a brick factory you can obtain cull bricks or brick tiles cheap or free-of-charge.
Should I put a fan behind my wood stove?
Just place a fan behind the stove. It should not be any closer than 24 inches from the stove, and it should not have plastic covers. This type of fan will move air away from a stove, making a noticeable difference.
What is a heat shield for a wood stove?
Wood stoves require heat shields both under and behind them to protect your home from heat damage. While many wood stoves include heat shields in their design, some do not. Shields protect your home from heat damage and fire one of two ways.
Can I use cement board behind my wood stove?
Safe wood stove installations require a heat shield that will prevent heat from the wood stove from creating a fire hazard in the building materials that form the exterior wall. Hardi cement board is an inexpensive solution that will form the foundation of an effective heat shield for any application.
Can you put tin behind a wood stove?
Installing sheet metal behind a wood stove creates a barrier to protect the wall and reduce fire risks. Installing sheet metal with the correct clearances behind a wood stove can prevent radiant heat from igniting combustible materials in the wall, which could result in a house fire.
How close can I put my wood stove to the wall?
The standard clearance recommended by the National Fire Protection Agency is 36 inches. This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood.
Does a hearth need to be raised?
The perimeter of the hearth should be clearly defined by either using a raised edge or by raising the level of the hearth in relation to the floor. The hearth should extend at least 150mm out from the stove at the sides and 300mm in front.
What is the best hearth for a wood burner?
The most common and best hearth material for a wood burning stove is stone, especially slate and granite. However, you will also find hearths made from glass and steel. These can withstand high temperatures without cracking or posing a fire hazard.
Do wood stove fans really work?
While the main benefits are clearly aimed at comfort rather than payback and money saving, the stove fan does reduce the heat demand of the stove. This means that it requires less fuel to heat the room, and consequently lowers my bills.
Do wood stoves save money?
Winter Heating Cost. home in a climate with moderate winters, it will cost only about $1,150 per year to heat the home with a Catalyst wood stove. That is a $350 annual savings over an EPA certified wood stove, an $800 annual savings over a pellet stove, and a $2,500 savings over a propane furnace.
Where should a wood stove fan be placed?
Where should I place my Ecofan? Be sure to position the Ecofan on a smooth flat surface on your stovetop near the side or back of the stove where cooler air can be drawn from behind and over the cooling fins. Do not place your Ecofan in front of the stovepipe or at the front of the stove.
What can I use as a heat shield?
A brick, stone or tile heat shield is equally effective but in a different way. These dense materials absorb lots of heat and gradually release it as air circulates around them. The simplest masonry heat shield is a cement board that is separated from the wall by one-inch ceramic spacers.
Can durock be used as a heat shield?
Strong, durable and resistant to water damage, DUROCK® Next Gen Cement Board is ideal for use in partitions, walls, floors and ceilings in residential construction and can be used as a heat shield. Water, Mould and Moisture Resistant.
Are cement boards fireproof?
Yes, HardieBacker® 1/4″ Cement Board is deemed noncombustible when tested to ASTM E 136 and can be used in conjunction with other noncombustible materials around a fireplace.
What is considered a non-combustible wall?
Non-combustible materials are building materials that do not burn or ignite when subjected to expected levels of fire or heat. Examples of non-combustible materials include brick masonry, concrete blocks, hardy backer board, calcium silicate board, cement board, metal, and certain types of glass.
Is durock considered non-combustible?
It features a dual surface, smooth coat for mastic applications, and textured coat for enhance bonding. This DUROCK® cement board is a non-combustible, water and mold-resistant panel designed for use under tile, in shower areas, and readily applied over wood or steel framing applications.
What can I put on the wall behind my stove?
Granite, stone and other natural or composite materials are also commonly used in backsplashes, whether in tile form or as larger pieces. These higher-end materials will mean an increase in budget, but also a stunning and long-lasting stove backsplash. Stainless steel is another popular option for stove backsplashes.
How do you shield wood with heat?
By far the most effective heat shields are the air cooled type. These shields are constructed with a sheet of 24 gauge or thicker sheet metal, or 1/2″ or thicker cement board, with 1″ of air space behind the shield and around the perimeter to allow free air flow.
Can you use ceramic tile behind a wood stove?
You can absolutely use tiles around the back and sides of your wood burner – and we also want to show you some inspiration on how to liven up your wood burner with fireplace tiles!.
What is the 2 10 rule?
If you are farther than 10′ away from the peak, your chimney needs to be 2′ above the highest point within 10′. For example, your chimney is exiting 20′ away from the peak and you have a 6/12 pitch roof.
Can you vent a wood stove through a wall?
Venting is an important component of all stoves. And wood, gas, and pellet stoves have different venting systems. For instance, wood-burning stoves will always be vented through the roof of your house, but pellet-burning stoves can be vented vertically through the roof, or horizontally through the wall to the outdoors.
Does a wood stove pipe have to go straight up?
The pipe should be as straight and short as possible, with sections properly secured. The horizontal portion of the pipe should rise not less than one-quarter inch to the linear foot, to insure a good draft. You should not pass a stove pipe through a combustible wall for a hook-up with a chimney flue.