Petroleum-based bar oil has been the standard for chainsaws. Lightweight oil is used in winter and heavier oil in summer. Manufacturers of chainsaws make bar and chain oils specially blended for their machines to extend their lifespan, but if they are not available, the owner’s manual suggests alternatives.
Can you use regular motor oil in a chainsaw?
Chain saw bar and chain oil isn’t rated by SAE like traditional automobile motor oil. If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.
What oil do you use for a chainsaw?
Use canola oil – Canola oil is currently the most common environmentally compatible chain-and-bar lubricant. Canola-based chain and bar oil has been extensively tested in Europe.
Can you use 4 stroke oil in a chainsaw?
Don’t use an oil mix in a 4-stroke engine If it is a 2-stroke engine and you forget the oil, you will damage the engine. However, if you have a 4-stroke engine, you should make sure you only use pure gas – otherwise, you will also risk damaging your expensive chainsaw.
What’s the difference between motor oil and chainsaw oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
Can I use 10w30 for chainsaw bar oil?
Can I Use 10w30 for Chainsaw Bar Oil? Yes, though it is not ideal for use in the winter. A 10w30 oil is multi-weight, meaning it will perform well in cold and heat. Yet 10w30 weight motor oil will be very tacky and viscous once the chainsaw heats up and starts to run.
What can I substitute for bar oil?
Here are four suggestions. Motor Oil. Motor oil is the most readily available alternative lube available. Vegetable Oil. Vegetable oil is also a quite affordable bar and chain oil alternative. Canola Oil. Canola oil shouldn’t be confused with vegetable oil. Drained Hydraulic Fluids.
What happens if you run a chainsaw without bar oil?
No bar oil equals increased friction and heat. That adds up to a huge increase in chain and bar wear. Without bar oil, the chain teeth, drivers and links will all wear far more quickly. The increased friction can cause teeth to break.
Can I use gear oil as bar oil?
Gear lube is about the same as SAE 40 engine oil (they are rated on different scales), so that would make standard bar oil and gear lube pretty close. I have used it before when I had nothing else, it’s a lot better than no oil or waste oil. I didn’t notice any difference in the performance of the oil pump.
Is a chainsaw 2 stroke or 4?
Two-stroke engine lubrication These days, you’ll find two-stroke engines in all kinds of equipment, such as chainsaws, grass trimmers and hedge trimmers, largely because two-stroke engines have fewer moving parts, generate less heat and are in many ways more efficient for their size.
Is 10W30 the same as SAE 30?
Yes, you can make use 10W30 engine oil instead of the SAE30 in your Lawn Mower. Older engines can use the SAE30, while the 10W30 is for modern engines. Again, the SAE30 is better for warmer temperatures while the 10W30 is suitable for varying temperature ranges and also works well in cold weather.
What happens when you use 4 stroke oil in 2 stroke engine?
A 4-stroke oil will flow from the crankcase to the engine components to be lubricated and then come back into the crankcase. Using a 4-stroke oil in a 2-stroke engine can therefore disrupt combustion and cause smoke formation and engine degradation.
What grade of oil is chainsaw bar oil?
To prevent this, chainsaw manufacturers make bar oils matched to the air temperature and the saw in which it is operated. Although they don’t disclose the weight of their oil, the University of Missouri Extension recommends in lieu of using a bar oil, select SAE 30 weight oil in summer and SAE 10 in winter.
What is SAE 30 oil?
SAE30 is a straight 30 weight oil used on your lawn mower and other 4 cycle outdoor equipment. SAE30 weight oil is rated only at the full operating temp of the engine. This means it is much higher than 30 when cold. Sometimes so thick that it cannot flow if it is cold enough out. The W means winter.
Does chainsaw bar oil go bad?
Now you’re wondering, does chainsaw chain oil go bad? Chainsaw chain oil lasts between 4-6 years when it’s stored in an unopened container or an opened container that has been tightly sealed. Bar and chain oil should be stored in a dark, dry, cool location.
What weight is chain and bar oil?
Once temperatures rise, switch back to your standard bar and chain oil, which may be anywhere between 20 and 50 weight (30 weight is standard). Using winter oil during summer might leave a lot more oil on the ground because the thinner oil won’t adhere as well to the bar and chain.
How much chain oil should a chainsaw use?
When to Oil Gas chainsaws use about one tank of bar and chain oil for every tank of fuel, so fill the reservoir every time you fill the tank.
Can I use vegetable oil for my chainsaw?
Kitchen oils are not necessarily designed for use on a chainsaw in the long term which could cause maintenance issues, so we’d recommend the use of a vege oil designed for your chain.
Do Electric chainsaws need bar oil?
Electric chain saws derive their power from an electric source, so they don’t need fuel to run. Most gas chain saws require a premixed gas-and-oil fuel to operate properly. Electric chain saws don’t require this added oil, but the bar and chain do need to be properly lubricated.