Why does my Brother printer keep saying replace drum?
The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.
How do I get my Brother printer to recognize my new drum?
I still receive the error message “Replace Drum”, or “Drum End Soon” after I replace the drum unit with a new one. Make sure that the machine is turned on. Open the front cover. Press and hold OK for 2 seconds. Press the Up arrow key or 1 to reset the drum counter. Close the front cover.
How do I fix the drum error on my Brother printer?
Drum Error (Drum!) The corona wires have become dirty. Clean the corona wires in the drum unit. The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Reinstall the toner cartridge and drum unit assembly. If the issue still continues, the drum unit is at the end of its life.
How do I reset my Brother printer parts?
FAQs & Troubleshooting Close the front cover. Make sure the machine is turned on. Press. (Settings). Press All Settings. (This step might be skipped in some models.) Choose Machine Info. or Machine Information => Parts Life. Press and hold Drum or Drum Life until the machine’s display message changes. Press Yes. Press.
What happens if I don’t replace printer drum?
A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner. While a broken drum unit won’t break your printer, it will just fail to stop printing at a certain point.
How long should a drum last in Brother printer?
The yield of a drum unit is approx. 15,000 pages (1 page/job). There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used and so on. Under ideal conditions, the average drum life is estimated at approximately 15,000 pages.
How do I know if my printer drum needs replacing?
The drum unit may need replacing if you notice the printer producing blurry, low-quality images. Black or colored toner spots on printouts also indicates a failing drum unit. In some cases, horizontal lines may develop across the printout every time the paper passes the failing part of the drum.
What does drum light mean on Brother printer?
The Drum LED flashes if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one. The Drum LED continues to flash if the drum counter was not reset when you installed a new drum unit.
How do you fix a printer drum?
Replacing the drum unit Remove the toner cartridge and drum unit assembly from the machine. Push down the green lock lever and take the toner cartridge out of the drum unit. Unpack the new drum unit. Make sure you put the toner cartridge in correctly or it may separate from the drum unit.
What does it mean when my printer says drum End Soon?
The message Drum End Soon indicates the drum unit will need to be replaced soon. You can replace the drum unit when you feel the print quality is no longer acceptable or when the message Replace Drum is displayed.
What does it mean when the printer says drum?
The drum unit is an electrically charged cylinder that fuses that toner powder onto paper to create text and images. Some printers only need you to replace the toner cartridge, and others require that you regularly replace both the toner cartridge and the drum unit.
How do I change the fuse in my Brother printer?
Follow the steps below: Press the Power button to turn off the printer. Open the Top Cover. Unscrew the two long screws as shown to release the Fusing unit from the printer. Remove the Fusing Unit from the printer by holding the handles on both sides. Remove the Oil Bottle and the Fuser Cleaner from the Fusing Unit.
How can I extend my brother drum life?
You can extend the drum life and keep it clean by occasionally cleaning the corona wire. You can simply do this by sliding the little plastic piece attached to the corona wire back and forth a couple of times. After you replace your drum, don’t forget to reset it.
How do you change a fuse in a Brother MFC 8950dw?
Brother Fuser Replacement Instructions Open the Back Cover. Seperate the Back Cover from the outer chute. Remove Back Cover. Remove the outer chute from both post. Push the the two knobs on the fuser cover and pull the cover down. Remove the fuser cover from the post and pull away from the machine.
What happens when laser printer drum goes bad?
What happens when a printer drum goes bad? When the drum wears out, you’ll begin seeing lines or faults repeated across the page. Replace the drum unit when you get white lines on your pages.
Is a printer drum the same as toner?
In short, the toner cartridge is a container that contains the toner powder, whereas the drum unit is an electrically charged cylinder that transfers the powder onto paper.
Can you clean a printer drum?
Look for chunks of toner on the drum unit. After you have removed the chunks of toner, dip a cotton swab in rubbing alcohol. Carefully wipe off any dirty areas visible on the drum. If the drum unit is dirty, apply some rubbing alcohol onto your lint-free cloth and carefully wipe the body of the drum unit.
How long does a Brother printer last?
The average lifespan of a printer is around 3-5 years. With proper upkeep and maintenance, some printers can last longer, but eventually your machine will need an upgrade.
How do I know which toner to replace?
Print a Test Page After printing the page, if one of the colors looks particularly light or is missing, that cartridge is nearly empty. If one of the colors is uneven or has streaks, this could be an indication that the cartridge is failing and may need replaced.